FAQ
1. How much does it
cost?
2. Does the
installation requires tools or drilling?
3. Does it come with tinted
options?
4. What does a Windblocker
do?
5. Will it fit with my
roll/style bar?
6. What is the Windblox Windblocker
made of?
7.
Will the Windblox Windblocker fit with the 94+ cockpit brace?
8. Will it fit the 99+ Miatas?
9.
Where can I store the Windblox Windblocker when not in use?
10. Will luggage fit on the
rear deck?
11. Can I still use the boot
cover?
12.
Can I put up the top with the Windblox Windblocker in place?
13.
Will the Windblox Windblocker fit underneath the hardtop?
14. Are tan brackets available for
the Miata?
15.
What is the difference between a windblocker and a windscreen?
1. How much does it cost?
Prices start at $63, up to $159
2. Does the
installation requires tools or drilling?
No drilling is required for any models. All models
install simply without problem.
3. Does it come with tinted
options?
Yes, smoke, copper, blue, orange, red, and green for acrylic
windblockers.
4. What does a Windblocker
do?
A windblocker prevent turbulence from forming in the
cockpit, resulting in a much more pleasurable ride when driving with the top
down.
5. Will it fit with my
roll/style bar?
There are many different types of roll bars and style bars
for the Miata, it would be impossible to test the Windblox Windblocker on every
one. There is one easy way to determine if the Windblox Windblocker work
with your particular roll/style bar. When installed the Windblocker rests
directly in front of the boot cover, thus if the front edge of your roll/style
bar does not extend past the row of buttons for the boot cover, the Windblox
Windblocker will fit your car! Another way to do this is to take a small
piece of card board or other thin hard material, place it straight up directly
in front of the boot cover buttons, if the card board clears the roll/style bar,
the Windblox Windblocker will fit.
6. What is the windblocker
made of?
The windblocker is made of 1/4 inch reinforced Acrylic or
Lexan. Reinforced acrylic is 20x stronger than glass; Lexan is 60x
stronger.
7.
Will the Windblox Windblocker fit with the 94+ cockpit brace?
Yes, it will.
8. Will it fit the 99+ Miatas?
Yes, as a replacement.
9.
Where can I store the windblocker when not in use?
All style of windblockers will fit nicely in the trunk.
When not in use, an optional Fitted Storage Cover is also available.
10. Will luggage fit on the
rear deck?
Yes, as long as the luggage does not extend beyond the
line of boot cover buttons. For instance, the Atlantic Design Luggage will fit
nicely behind the Windblox Windblocker.
11. Can I still use the boot
cover?
Yes, all windblocker styles does not interfere with the
boot cover.
12.
Can I put up the top with the windblocker in place?
Yes, all windblockers are designed to remain in place with
lowering and raising the top.
13.
Will the Windblox Windblocker fit underneath the hardtop?
Yes, there is even more space under the hard top, about 2
inches all the way around.
14. Are tan brackets available
for the Miata?
Yes.
15.
What is
the difference between a windblocker and a windscreen?
A windblocker is a rigid
screen made of acrylic or lexan. A windscreen is a cloth version
constructed of a pliable, plastic window.
